DAUTO TIE -UPS

Indore: 23-Apr-2018- The Shri Govindram Seksaria Institute of Technology and Science Indore signed an MOU with DAuto for operating and maintaining Centre for Innovation, Design and Incubation (CIDI) which is the first Design Center established in the Madhya Pradesh. The center was inaugurated by minister of state for technical education and skill development (independent charge) Deepak Joshi.

The centre would promote innovations, help students in designing products and encourage them to take entrepreneurial route. The event also was accompanied by the SGSITS Director Dr. RK Saxena, RGPV Vice Chancellor Dr. Sunil K Gupta, Director (technical education) Dr. Veerendra Kumar and Director DAuto Mr. Vikas Pandey.

Under the MOU, the DAuto will promote the advanced technological expertise for fulfilling the mission of MAKE IN INDIA, SKILL INDIA, STARTUP INDIA in the state and prepare the youth according to the industry requirements and need for becoming entrepreneurs. The students could make their own products, projects, plans and generate output out of the training at the CIDI.

BHOPAL  - 3rd April 2017– The Bhopal Smart City Development Corporation Limited signed a memorandum of understanding (MOU) with MANIT Incubation Center, Bhopal and the DAuto Engineering Private Limited to, kick-starting cooperation in the sustainable projects on design, development, planning, construction, engineering and consultancy services. Also, transferring technology from abroad to Bhopal, Madhya Pradesh and making the city SMARTER. The memorandum was signed on behalf of the BSCDCL by the commissioner of Bhopal Municipal Corporation Mrs. Chhavi Bhardwaj, Chairman of MANIT Incubation Center Dr. Ameenur Rehman Siddiqui along with advisor Dr. Gajendra Dixit and Director of DAuto Bhopal Mr. Vikas Pandey. The brief ceremony took place in Collectorate Bhopal. Continue to read more...

ITALY: The DAuto Engineering Private Limited, Bhopal has signed a Memorandum of Understanding with the Geo Engineering (S.R.L.) and Hydrodata (S.P.A.) Italy to collaborate to address a wide range of projects related to water resources management, climate change mitigation plans, infrastructures design and development of land resources at a global level across the industry. 

GEO with its three decades of extensive experience manages the entire cycle of consultancy services, Design, Planning related to the interaction between structures, soils & rocks, water bodies and groundwater. GEO refers to appropriate procedures, customized for institutional bodies, companies and enterprises and private citizens. It works with a regime of quality certified by national Agency, a network of qualified suppliers specialized into geognostic, geophysical, monitoring investigations and able to provide turn-key solutions. GEO enhances its operational flexibility through a constant interaction of personnel engaged in the office and in the construction sites. Continue to read more..

6th May 2016- A Memorandum of Understanding signed between DAuto Engineering Private Limited and Shri Govindram Seksaria Institute of Technology and Science Indore, to prepare ready-to-work engineering youth in various industries via technology transfer, product research, design development and “Design-for-Manufacturing” training, practical, practice and knowledge.

The event was held at the residence of Technical Education Minister, Madhya Pradesh. It was accompanied by Shri Umashankar Gupta (Technical Education Minister, M.P.), Dr. Ashish Dongre (Director, Directorate of Technical Education), Shri Subodh Pandey (Head, State Project Facilitation Unit) and The MOU got exchanged between Dr. Rakesh Kumar Saxena (Director, SGSITS) and Shri Vikas Pandey (Director, DAuto).

It is sort of an Industry-Institute collaboration where DAuto represents itself as an industry involved in providing product research, design, development, analysis and manufacturing solutions to the customers nationally and internationally. On the other hand, SGSITS is recognized as a leading institute in the state of Madhya Pradesh and the western region consistently during its glorious journey of sixty years. It has been ranked among the top 30-40 institutes on a national level (including IITs and NITs) by independent bodies (source:SGSITS).

The entire process, moment and purpose of this MOU can be found here.

Dassault Systemes announces partnership with DAuto Engineering Private Limited. Both aim to expand opportunities for creating social enterprise and building new level of innovations through 3D engineering.

Research, design, product development, Analysis and best CAD, CAM CAE services are the registered exertion of DAuto and the activities are involved with various sectors and industries globally. On the other hand, CATIA, Solidworks, SIMULIA, ENOVIA, 3DVIA and DELMIA are registered trademarks of Dassault Systèmes or its divisions in the US and/or other nations.

Students, professionals, workers, teachers, and engineers can take the benefits of this partnership. The education part comes under the association and DAuto established as an authorized partner for it among 16 partners of DS in India. DAuto will provide the quality and authorized training on CATIA, so that required students (branch is no bar) could learn from the scratch. This would enable them to build real product rather than imaginary object. The students will be able to learn more advanced industry oriented training along with joint legal certificates which are valid globally to showcase for inviting the job opportunities.

Dassault Systemes and DAuto both look this association towards improvement in employment by making young engineers and students capable to grab the opportunities in product research, design and development through industry oriented features on CATIA.

Partnership details can be found on Dassault Systemes official website or at; DAuto-Dassault Systemes Partner Detail

 13th Apr. 2016- DAuto and the Samrat Ashok Technological Institute (SATI) Vidisha signed a historic memorandum of understanding (MOU) , to allow engineering students to get benefits of their chosen branch and related options for building successful career.

The significant moment was accompanied by the respective persons of mechanical and civil departments of the institute; Dr J.S. Chauhan, Dr Lokesh Bajpai, Prof Sandeep Jain, Prof Sanjay Jain,Dr A. K. Saxena, Dr Sanjay Bhandari and DAuto team; Mr. Vikas Pandey, Mr. Sarvesh Pandey.

DAuto and SATI vidisha  have agreed to explore areas of potential academic co-operation and opportunities for the progress of the product research, design and development field by availing opportunities for the students, learning experiences and by identifying ways in which they can co-operate and work together in a team.  This is to generate and support qualified, informed and creative individuals who have ability to understand and capitalize the opportunities, have interest to solve problems through design as well as uplift the design sensibility to match the domestic and international market. DAuto shall provide the core practical knowledge and experience through real life products and projects for strengthening the skills of the students. More detail of this MOU could be explored here.

The 14th day of December 2015- Madhav Institute of Technology and Science, Gwalior and DAuto Engineering Private Limited, Bhopal agreed to run upon a common path by signing an MOU as Industry-Institute-Interaction. The significant moment was accompanied by; Dr. Sanjeev Jain, Director (MITS, Gwalior), Mr. Vikas Pandey, Director (DAuto Engg. Pvt. Ltd), Dr. Pratesh Jayaswal, Associate Professor (MITS, Gwalior), Dr. C S Malvi, Head, Deptt. of Mechanical Engg.(MITS, Gwalior)

Through this Memorandum of Understanding (MOU), plan will communicate excellent learning opportunities to the students by disseminating knowledge which DAuto Engineering Pvt. Ltd. has acquired in high-quality research, design and product development services on major Automotive, Power, Agriculture, Civil, Consumer goods and General engineering sectors’ projects.

Students would be capable enough to design and develop a real life product by following all the industry norms and working conditions after being a part of Training to be given by DAuto under this MOU. Here is a complete Note about Why MITS Gwalior signed this MOU with DAuto.

DAuto teamed up new venture called Flexi MOU with Industrial Training Institutes of Indore, Gwalior, Ujjain, Sagar and Gas Rahat ITI along with replenishment of Model ITI Bhopal on 29th September 2015 at Vallabh Bhavan in the workplace of Shri Umashankar Gupta, the Technical Education Minister, Madhya Pradesh.

The event was accompanied by; the Honorable Shri Umashankar Gupta, the Technical Education Minister, Madhya Pradesh, Mr. Sanjay Singh IAS Principal Secretary, Technical Education and Skill Development, Madhya Pradesh, M Sibi Chakravarthy IAS (Director) MPCVET. (IAS Director and CEO MPCVET, Madhya Pradesh), Mr. G. N. Agrawal (Adl. Director) MPCVET, Bhopal and the principals of Ujjain, Indore, Gwalior, Sagar, and Bhopal ITI(s).

The endeavor was the consequent aftereffect of past amazing accomplishment of Flexi MOU promotes MAKE IN INDIA , in which DAuto and Model ITI tied up, to groom technical education in industrial training institutes.

Some of the motives behind signing this MOU;

• DAuto joins hands with ITI(s) for the benefits of technical education and its enhancement in Madhya Pradesh.
• It is FREE of COST activity where students will get trained directly by the Industry Experts.
• In last MOU, DAuto placed some of the ITI students in the Abroad which itself shows the level of training.
• It is purely based on research, design and product development training called “Design-for-manufacturing” where students learn to design which can be manufactured.
• It is industry, plus job oriented training rather than theoretical papers.  

An entire News is here to get more features of these MOUs.

Industrial Training Institute and DAuto signed a Memorandum of Understanding on 5^th Day of December 2014 to push “Design for Manufacturing” more rapidly in Central India. This is the first Flexi Memorandum and has signed in the presence of Honorable Mr. Sajyay Singh (IAS Principal Secretary, Technical Education and Skill Development, Madhya Pradesh), Mr. M Sibi Chakravarthy (IAS Director and CEO MPCVET, Madhya Pradesh), Mr. Sunil Desai (Principal, Model Industrial Training Institute) and Mr. Vikas Pandey (Director DAuto).

The main intention through MOU is to build the Research, Design and Development competency more effective in Madhya Pradesh whereas students will get benefited from latest technologies, understand the product better and can look forward for better opportunities. Technology enhancement always focused towards seeking a better and efficient product with lesser financial aspect through successful innovations. This is a small step towards nation dream of “Make in India” and we all are looking forward to make it happen in near future with “know-how” ability. The proper guidance and technological approach can definitely be a great help for Ideas to take appropriate shape. Technology transfer from convention to modern industrial practical approach and latest industry oriented demand will be the key for success. 

Sagar group and DAuto signed a Memorandum of Understanding on 11 Day of October 2013 to enhance the research design and development services. This memorandum has completed in the presence of Mr. Prashant Jain (Honorable Group Director) and Mr. Vikas Pandey (Director DAuto) along with Mr. Suresh Baghariya and Dr. N.K Agarwal. 

In today’s scenario it is very tough to get job of our own choice and that too within the appropriate period of time. Hence DAuto provides proper guideline with opportunities in various sectors such as Automobile, Electrical, Power, Civil, Agriculture and many more. And hence students can also prepare themselves for their targeted sector along with the proper guidance.

Our main motive of MOU is to increase the information and knowledge of students by the way of modern technologies and to support best technical skills for the students based on exclusive design, research and development, So that students can have a bright future. The students can also come across many live projects in various engineering sectors and will also get opportunity to relate with our domestic engineering clients and international clients who works in North America and Europe. DAuto will guide the students technically for their career and their future opportunities.

July 05, 2013: Department of Engineering and operation circle, DAuto India, recently signed a Memorandum of Understanding (MoU) with Autostudi, Italy, one of the pioneer Automotive companies to enhance the research design and development services across the world. 

DAuto has its remarkable reputation internationally, and proved as a highly diversified business conglomerate in Engineering Services and offers significant solutions within time verge to customers in Automotive, Power, Electrical, Civil and general engineering precinct. 

Autostudi recognizes with its name, projects and consultants in global automotive market. Based in Italy; founded as an industrial designer and supplier of automotive projects in 1983. Excellent serviceability, professionalism and optimum project management make its status effervescent. 

The objective behind this move is to add benefit to the young emerging engineers to grab the design answers. Both organization look forward to support each other in design solutions and best product services to the customers. 

"This indeed is a wise association, serving the interests of both the organization and also benefiting the engineering industry," remarked Kailash Nath Pandey, Director DAuto.

June 29, 2013, Bhopal (Madhya Pradesh): DAuto and Rajiv Gandhi Proudyogiki Vishwavidyalaya (RGPV), Madhya Pradesh signed a Memorandum of Understanding (MOU) to provide a new height in students’ career graph.

DAuto requires imparting acquaintances about design technologies, to the students undergoing the Mechanical and Automobile Engineering courses at the university, and enabling them to become more employable. DAuto shall also provide the minor or major projects on design material for implementing the training.

‘The more practical, the more concepts clear”. On this theme, DAuto wants to encourage all university students so they could be able to improve their design skills which are the timeless necessity in all scenarios. The Indian industries are continuously in need of skilled manpower. An effective solution to this situation is a strong industry-academia partnership that will help create a skilled and steady pool of productive talent. Keeping this approach in mind, university established this MOU to provide the relevant academic edge to students through a comprehensive curriculum which will empower them to take on newer challenges. Going forward, this memorandum will also bring industry perspective to a classroom environment and will offer intensive learning in the various specialized functions of the design. There are many opportunities in Research, Design & Development field of engineering only a path is required to grab on; Finish School activity of RGPV promotes to build such path for the future engineers to hit today’s demand in the engineering market. DAuto will assist the students to get familiar with design world and the opportunities by putting all relevant knowledge in their bags. This MOU will create a prospect to the students to get practical knowledge by handling real life projects at DAuto and solve real life issues in design industry. 

The MANIT (MAULANA AZAD NATIONAL INSTITUTE OF TECHNOLOGY) provides an education quality Grid infrastructure for a myriad of applications from various scientific domains, including Mechanical sciences, high energy physics, Electrical and electronics and many more. The project brings together lecturers and engineers from different areas.

The objectives of MANIT are to promote advancement in Science, research and development at the National level, and to encourage communication and collaboration among engineers and as well as to disseminate information in science through modern communication technology. In line with this mission the MANIT strategic plan calls for the establishment of partnership with private sector companies who share these objectives.

MANIT purpose is "to promote the vital role of engineers, engineering and technology in our society and to inspire people to pursue careers at all levels in engineering and technology." Also, as a part to encourage future Design Engineers in relative field, DAuto avail extra facilities to MANIT students.

The main motive through MOU is that we can increase the information and knowledge of students by the way of modern technologies and to support best technical skills for the students based on exclusive design, research and development, So that students can get more option in their career. The students can also see live projects in various engineering sectors. The students can get technical guidelines of prototype component parts and physical components parts of automotive sector through our technical experts. Students will get opportunity to relate with our domestic engineering team clients and international clients who works on North America and Europe they will guide technically to the students for their career and their future opportunities. 

To ‘Engineer’ literally means to “make things happen”. Engineering is about the Research, design and Development of useful products and services. Engineering know-how converts knowledge into technology and then technology into successful innovation. Many seemingly simple aspects of our daily lives have been abstracted, designed and developed by an engineer.But more of people are away from their actual capabilities, and their use of knowledge consequently with the opportunities which they can grab just after their graduation, how they can build their career in Research, Design, Development, Production, Assembly line, Maintenance, Planning, Vendor development and many more option in various department with sector are available in the form of acquaintances.

JEC Jabalpur and DAuto signed a Memorandum of Understanding on 22nd Sep. 2012. DAuto mission statement is to educate the Students in the field of Research Design & Development in Automotive (CAR) design by providing a professional guidance through latest environment that faster’s learning. This memorandum has completed in the presence of Honorable Principal (Prof. Virendra Kumar) and DAuto Director (Mr. Vikas Pandey).

The NRIIST Bhopal and DAuto tied the knot in the form of IIC (Industry Institute Collaboration) on 1st Day of October 2012 for benefitting mechanical students. In today’s scenario there is very tough to get own choice job, provided acquired knowledge collected within time verge for getting it. Hence DAuto provides guideline with opportunities in various sectors such as Automotive, Electrical, Power, Civil, Agriculture and many more. And students can prepare themselves for their targeted sector along with required expertise.

NRI institute of science & technology keeps the part of Institute which is dedicated for fostering and preparing the future engineers in various fields.Technology transfer and knowledge exchange has been important for many years. The foremost reason is the general benefit to society and the fact that technology transfer triggers innovation and improves a country’s long term growth, Where new generation play the important role to carry towards.

Bagula Mukhi College of Technology (BMCT) is a private research institute located in Bhopal, India. AN intellectual students’ hub, BMCT is well known for its research prowess. Graduate Programs offered at BMCT include a range of engineering programs like Mechanical Engineering, Civil and various Engineering, Computation for Design and Optimization, Computational and Systems Electrical Engineering and Computer Science, Engineering Systems, Sciences and Technology.

The process of producing engineering drawings, and the skill of producing them, is often referred to as technical drawing or drafting, although technical drawings are also required for disciplines that would not ordinarily be thought of as parts of engineering (such as Design and development in Automotive, electrical, power, aerospace, shipbuilding, submarine , architecture, landscaping, cabinet making, and garment-making etc.).

Many engineers develop new products. During the process, they consider several factors. For example, in developing an industrial robot, engineers specify the functional requirements precisely; design and test the robot's components; integrate the components to produce the final design; and evaluate the design's overall effectiveness, cost, reliability, and safety. This process applies to the development of many different products, such as chemicals, computers, power plants, helicopters, and many more, in order to this BMCT has established a connection so that their students can be benefited with the opportunities along with guidance from the DAuto experts.